LifeTrac v20.12

From Open Source Ecology

Revision as of 12:12, 27 June 2021 by Calligarov (talk | contribs) (→‎CAD)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Working Doc

Motor Selection

Track Unit Work Doc

Note that modularity is being built in so that the drive unit can handle both track or wheel drive.

CAD

Gallery:

Universal Track Unit Assembly from parts. - FreeCAD -File:Utu assy2.fcstd
Hydraulic motor coupler assembly only. - FreeCAD -File:Hydmotorcouplerassy.fcstd
Through keyway hub with track drive. - FreeCAD -File:Throughkeywaysprocket.fcstd
Modular track wheel. - FreeCAD -File:Trackwheel.fcstd
Idler. Specification of 10" pipe sections used in idlers - [1] - 10.75" OD and .365" wall - FreeCAD -File:Idlerslibrary.fcstd
Modular track unit track. Made using Path Array. FreeCAD file -File:Trackunittrack.fcstd
Track Drive Sprocket. - FreeCAD -File:Drivesprocket1.fcstd
2" Bearing - FreeCAD -File:2inchbearing.fcstd
Hydraulic motor, BMER-2-250. - FreeCAD -File:Bmer2.FCStd.
Extreme Hydraulics Motor EXT-M598WMB - FreeCAD -File:EXT-M598WMB.fcstd.
Big motor drive sprocket - FreeCAD -File:BigDriveSprocket.fcstd.
Coupler for Small drive sprocket and Extreme Hydraulics Motor EXT-M598WMB - FreeCAD - File:ShaftSprocketCoupler.fcstd
Drive Chain made using 100 Pitch Chain and Path Array- FreeCAD - File:DriveChain.fcstd
Motor Drive module, parts list in the file page- FreeCAD - File:MotorDrive.fcstd
1 7/8" Bearing- FreeCAD - File:1inch875Bearing.fcstd
1 7/8" Track Idler Shaft- FreeCAD - File:1inch875IdlerShaft.fcstd
Small Motor Drive Sprocket- FreeCAD - File:SmallDriveSprocket.fcstd
Track Idler module- FreeCAD - File:TrackIdler.fcstd
1 7/8" Track Drive Shaft- FreeCAD - File:1inch875DriveShaft.fcstd
Track Drive module- FreeCAD - File:TrackDrive.fcstd
Coupler for Track Drive Sprocket and 1 7/8" Track Idler Shaft or 1 7/8" Track Drive Shaft- FreeCAD - File:TrackSprocketCoupler.fcstd
Frame Cover- FreeCAD - File:FrameCover.fcstd
17 teeth 100 pitch Sprocket- FreeCAD - File:17teeth100pitchSprocket.fcstd
35 teeth 100 pitch Sprocket- FreeCAD - File:35teeth100pitchSprocket.fcstd

Technical

~~Motor - [2]~~

Links

More

Retrieved from "https://wiki.opensourceecology.org/index.php?title=LifeTrac_v20.12&oldid=255822"