Metal

Frame U-channel, 6" with 7/16" web - 22' -
Arms - 24' 1/2"x4"x6" angle -
Legs - 20' of 1/4"x2" square tubing -
12 Sleeves, 3/16"x2.5" square tubing, 6' total -
Feet - 1/4" squares, 10" - 40" total -
[1] 5'x10' sheet of 1/8" steel -
Front Hopper Supports - 1/4"x4" angle -
Rear Hopper Supports - 1/4"x2" square tubing -
Hopper Mount Plate - 1/2"x3", 52" total -Pi
1" DOM Tubing cylinder mounts , 3" long -
1" pins - cylinder mounts - 18" -
Compression chamber, 1/4"x2" angle - 40" -
Plate, 1"x6"x12" -
Plate, 1"x4"x10" -
Press foot mounting DOM - 2.5"x4", 4" long - $40
Grate, 1/4"x2" angle, 18' -
Rebar, 1/2", 99' -
1/4"x2" flat, 6' -
3/4"x1-1/2" bolts with nuts and washers - for frame, arms, legs, feet, interface plate + shipping - $37 + shipping
1/2"x1-1/2" bolts with nuts and washers - 32 - $9
1/2"x3" bolts with nuts and washers - 10 - $4
13mmx50mm bots with nuts and washers - $3
Drawer Materials - 1/2"x4"x6" heavy angle, 12" -
1/4"x8" flat, 12" long -
1"x7" flat, 12" long -
1/4"x5", total 27" long -
Eyes - 1/2"x3", total 18" long -
1/2"x4"x6" tube - 12" long -
1"x4" flat - 12" long -
1/2"x2" flat, 63" long -
1/4x2.5" flat, 63" long -
V-groove roller holders - 1/2"x3" flat, 24" long total -
[18] Hopper hinges - $36

Hydraulics