RTK GPS

From Open Source Ecology
Revision as of 22:40, 10 August 2023 by Marcin (talk | contribs) (→‎Howto)
Jump to navigation Jump to search

Howto

You can use a small computer + simple receiver with antenna to get cm accuracy GPS correction signals. Here is how to set up a reference station using a <$300 receiver + antenna. [1]. THis is good to 2 mm, with service degrading 1.5 cm every 10 km. So you can set up one, for a working region.

Can you do RTK correction in software, without the $300 receiver? Yes, a chip - $10 - but you need some basic stuff around the chip.

Turnkey correction station: $700. https://www.sparkfun.com/products/22429

Basics

  • Up to 20 times per second update rate [2]
  • Resolution drops to a few centimeters once base station is 10km from moving node [3].
  • A Method of Satellite Navigation/Survey that utilizes one or more constellations, and a Base Station
  • This allows for 1cm Level Accuracy
  • Refresh Rate Typically Can Be ~1hz, but 20hz Models Exist (According to SparkFun, further looking around can be done if need be)
  • Useful mainly for Surveying and Precise Remotely Operated / Autonomous Vehicles
  • Low cost cm accuracy in GPS using GLNS module with android - [4]

How Are Boundaries Recorded

  • There is a legal description like [Sec 32, T8N, R1E, E 1/2 of NW 1/4 Ex Com at NW Cor of Sd E 1/2 of NW 1/2, Th E Alg N Ln of Sec 140 ft, S Parl with N&S 1/4 Ln of Sec 311 Ft. W Parl With N Sec Ln 140 ft, N 311 Ft to Beg)] [5]
  • Missouri has corner posts at all sections (mile squares) and at the quarter section (mid point between section corners) [6]


Internal Links

External Links