Mount Power Cube

From Open Source Ecology
Revision as of 21:38, 18 June 2011 by Marcin (talk | contribs) (Created page with "*Measure Power Cube and location of mount for tractor *[2] Drill Mounts – 2 holes on ends each, top and bottom *Prepare eye - 1/4"x3"x3" *Transfer punch mount hole locations fo...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • Measure Power Cube and location of mount for tractor
  • [2] Drill Mounts – 2 holes on ends each, top and bottom
  • Prepare eye - 1/4"x3"x3"
  • Transfer punch mount hole locations for top and bottom mount
  • Mark mount hole locations on other side of beams
  • Weld Mount eye on bottom of Power Cube
  • Weld mount eye on bottom Power Cube Mount
  • Mag drill holes in frame -
  • Mount Power Cube on Tractor
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Mount_Power_Cube&oldid=31517"