Build Hydraulic Tanks

From Open Source Ecology

Revision as of 21:52, 18 June 2011 by Marcin (talk | contribs) (Created page with "*Cut 1/4"x6"x12" tube for hydraulic tank *Secure 3 bungs - 3/4" for filler/breather, 1" for return line filter, and 2" for suction strainer (extender plus bunk *Grind tanks down...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Cut 1/4"x6"x12" tube for hydraulic tank
Secure 3 bungs - 3/4" for filler/breather, 1" for return line filter, and 2" for suction strainer (extender plus bunk

Grind tanks down to clean, including fuel tanks
Clean edges and bungs
Ream any necessary holes
Lay out 3 sets on welding table
Close off bungs with fittings
Tack everything
Weld
Assemble tank
Test hydraulic tank with air pressure and soap solution

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Build_Hydraulic_Tanks&oldid=31525"