Build Hydraulic Tanks

• [1] Cut 1/4"x6"x12" tube for hydraulic tank
• [2] Cut 1/4"x6"x12" end closures
• Secure 3 bungs - 3/4" for filler/breather, 1" for return line filter, and 2" for suction strainer (extender plus bung proper)
• Torch out 3 bung holes as in last step
• Grind tank edges and bung edges clean wherever bead will be welded.
• Clean edges and bungs
• Ream any necessary holes
• Lay out 3 sets on welding table
• Close off bungs with fittings
• Tack everything
• Weld
• Assemble tank
• Test hydraulic tank with air pressure and soap solution