Main Cylinder Top/2nd Cyl Bottom Mounts

From Open Source Ecology
Revision as of 01:24, 19 June 2011 by Marcin (talk | contribs) (Created page with "*Cut 6x12x1/2" plate *Drill 4 holes on 2 pin holes on each plate *Weld 1" drilled out nut onto plates *Bolt to arms Category:Fabrication Procedures")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • Cut 6x12x1/2" plate
  • Drill 4 holes on 2 pin holes on each plate
  • Weld 1" drilled out nut onto plates
  • Bolt to arms
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Main_Cylinder_Top/2nd_Cyl_Bottom_Mounts&oldid=31605"