Build QA Plate Mounting Eyes

From Open Source Ecology
Revision as of 01:11, 19 June 2011 by Marcin (talk | contribs) (Created page with "*Cut [2] 3x7x1" pieces with bandsaw *Weld pieces together *Drill pieces for eye hole *Torch out slit *Cut piece of 1" rebar for inside of arms, reinforcement *Insert 1" shaft thr...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • Cut [2] 3x7x1" pieces with bandsaw
  • Weld pieces together
  • Drill pieces for eye hole
  • Torch out slit
  • Cut piece of 1" rebar for inside of arms, reinforcement
  • Insert 1" shaft through both eyes of tractor arms
  • Weld eyes in place
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Build_QA_Plate_Mounting_Eyes&oldid=31598"