Ironworker/Bill of Materials

From Open Source Ecology
< Ironworker
Revision as of 03:21, 23 August 2011 by Ryan Lutz (talk | contribs) (Created page with "{{ToolTemplate|ToolName=Ironworker}} ==Bill of Materials== *5"x8" hydrauilic cylinder *[2]1"x4" pin - for mounting cylinder *[2]3/4" or 1" washers *[2] 1"x10"x48" plate - main ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


Ironworker
   Home  |  Research & Development  |  Bill of Materials  |  Manufacturing Instructions  |  User's Manual  |  User Reviews    Ironworker.png


Bill of Materials

  • 5"x8" hydrauilic cylinder
  • [2]1"x4" pin - for mounting cylinder
  • [2]3/4" or 1" washers
  • [2] 1"x10"x48" plate - main parallel pieces
  • [2] 1"x10"x32" plate - vertical supports
  • [2] 1"x2"x3" plate - for reinforcement of pressing surface
  • [4] 3/8"x4"x6" angle, 6" long - for legs
  • [2] 1"x5"x5" plate - for alignment tube
  • [2] 1"x4"x8" plate - for dye holders
  • DOM tubing to hold die - 2" long
  • Smaller DOM tubing to support die from underneath
  • 2.5" DOM tubing, 5" long - for alignment
  • 2.5" shaft, 7.7" long - for pressing
  • 2.5" DOM tubing, 4" long - for main pin
  • 2.5" shaft, 5" long - main pin
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Ironworker/Bill_of_Materials&oldid=36933"