Cold Saw/V1 Design Files/Drive Collar

From Open Source Ecology

< Cold Saw‎ | V1 Design Files

Revision as of 18:27, 25 May 2012 by YK (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Outside Diameter: 76.2mm

Inside Diameter: 32mm

Length: 30mm

Setscrew Hole Positioning: 4 on end face, 4 on round face, equidistant and not interfering with each other.

Setscrew Hole Diameter: 6.8mm Thru 1 Side, M8x1.25 tap

Face Setscrew Hole Spacing Along Length: 15mm

End Setscrew Hole Spacing From Center: 30mm

2D Image

3D CAD STP

File:ColdSawV1DriveCollar.stp

2D Fabrication Drawing PDF

File:ColdSawV1DriveCollar.pdf

2D Fabrication Drawing DXF

File:ColdSawV1DriveCollar.dxf

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Files/Drive_Collar&oldid=63696"