Cold Saw/V1 Design Files/Clamp Block
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
Clamp Block
- Length: 50mm
- Width: 25.4mm
- Height: 25.4mm
- Jaw Hole Diameter: 10.5mm DIA then M12x1.75 Tap
- Jaw Hole Height: 13mm
- Jaw Hole Spacing Along Length: 30mm
- Jaw Hole Notes: The fastener hole is closer to the center of the vise so that a jaw of the same slot length can move closer to the center of the clamping volume.
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF