Cold Saw/V1 Design Files
< Cold Saw
Jump to navigation
Jump to search
Uniform Part Dimensions
- Plate: 25.4mm x 304.8mm (Base Plate, Swivel Plate)
- Flat Bar: 76.2mm x 50.8mm (Shaft Block, Fixed Block, Moving Block, Long Spacer)
- Flat Bar: 25.4mm x 127mm (Base Flat, Support Bar, Bridge Bar, Interface Bar, Vise Jaw)
- Flat Bar: 3.175mm x 25.4mm (Blade Guard Support)
- Flat Bar: 1.6mm x 152.4mm (Blade Guard)
- Round Bar: 152.4mm DIA (Base Disc)
- Round Bar: 127mm DIA (Blade Mount Disc)
- Round Bar: 76.2mm DIA (Shaft Collar with Axial Tensioning, Large Thrust Washer)
- Round Bar: 50.8mm DIA (Shaft Coupling, Shaft Collar, Short Spacer)
- Round Bar: 31.8mm DIA (Shaft, Operation Handle, Vise Handle)
- Round Bar: 8mm DIA (Small Rod)
- Bolts and Nuts: M12x1.75 THREAD
- Threaded Rod: M30x3.5 THREAD
- Nuts: M30x3.5 THREAD
Uniform Mounting Dimensions
- Base Plate to Base Flat: 80mm x 520mm
- Base Flat to Vise: 50mm x 90mm
- Vise Rod to Rod: 95mm
- Support Flat to Interface Flat: 75mm x 80mm
- Hydraulic Motor to Interface Flat: 40mm x 100mm
- Blade Guard to Interface Flat: 80mm x 100mm