Samthetechie log

Sat, May 18, 2013

Task 1

• Progress on 18th: Working on sketchup models for OSE-OSHW-Dev-Backhoe
• Current Status: temporarily on hold until task 2 is complete. Note Backhoe.skp needs updating with new 'mouse ear' Stock Pivot Plate

Input

• • explanation and orientation from marcin about the Backhoe.
  • shown key documents/resources:
    • Backhoe dev page: OSE-OSHW-Dev-Backhoe
    • Backhoe sketchup models in a zip file: Backhoe_Boom_in_Sketchup (my starting point for the day in terms of sketchup source files).
    • Backhoe Prior Art

Output

• File:Stock Pivot Plate.skp
• File:Stock Bonding Plate 8 inches x 16 inches.skp
• File:Backhoe.skp
• File:Stock Spacer Plate 8 inches x 8 inches.skp

Tues, May 21, 2013

Task 2

Input

• Working on sketchup models for Universal_Constructor_Set
  • Note: deadline for demo with 3d printers.

Output

• First 12 foot tube modelled and uploaded. Please peer review model and provide feedback: File:12 foot stock 4 inch square tube with half inch walls.skp
  • Screenshot:
• File:11 foot stock 4 inch square tube with half inch walls.skp
• File:10 foot stock 4 inch square tube with half inch walls.skp
• File:9 foot stock 4 inch square tube with half inch walls.skp
• File:8 foot stock 4 inch square tube with half inch walls.skp
• File:7 foot stock 4 inch square tube with half inch walls.skp
• File:6 foot stock 4 inch square tube with half inch walls.skp
• File:5 foot stock 4 inch square tube with half inch walls.skp
• File:4 foot stock 4 inch square tube with half inch walls.skp
• File:3 foot stock 4 inch square tube with half inch walls.skp
• File:2 foot stock 4 inch square tube with half inch walls.skp
• File:1 foot stock 4 inch square tube with half inch walls.skp