All public logs

Combined display of all available logs of Open Source Ecology. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 17:21, 15 June 2013 Samthetechie talk contribs uploaded File:3x30x1.50 DIA CYL.skp (*Sketchup Model of the 30" stroke cylinder as per: https://www.surpluscenter.com/item.asp?item=9-8262-30&catname=hydraulic *Retracted Length is: 40 1/4 " *Extended Length is 70 1/4 " *Stroke is 30" *Screenshot 800px)
• 23:03, 1 June 2013 Samthetechie talk contribs uploaded File:Hydraulic Cylinder 2.5 inch bore 36 inch stroke.jpg (=Warnings/Caveats= This model is only intended to show the retracted and extended distance between the mountings of the hyrdaulic cylinder. It should be noted that model is only a work in progress and a lot of the finer details of the geometry are not ...)
• 23:03, 1 June 2013 Samthetechie talk contribs uploaded File:Hydraulic Cylinder 2.5 inch bore 36 inch stroke.skp (=Warnings/Caveats= This model is only intended to show the retracted and extended distance between the mountings of the hyrdaulic cylinder. It should be noted that model is only a work in progress and a lot of the finer details of the geometry are not ...)
• 16:11, 1 June 2013 Samthetechie talk contribs uploaded File:Closeup3DLifeTracAndBackhoe.jpg (Shows 1' 3" height)
• 03:38, 26 May 2013 Samthetechie talk contribs uploaded File:Samthetechie.jpg
• 02:47, 26 May 2013 Samthetechie talk contribs uploaded File:Articulated Pivot.jpg (Screenshot of File:Articulated_Pivot.skp)
• 02:46, 26 May 2013 Samthetechie talk contribs uploaded File:Articulated Pivot.skp (This is part of the Backhoe and is attached between the File:Boom.skp and the File:Pivot_Mounting_Plate.skp Screenshot: 800px)
• 02:31, 26 May 2013 Samthetechie talk contribs uploaded File:Stick.jpg (Screenshot of File:Stick.skp)
• 02:30, 26 May 2013 Samthetechie talk contribs uploaded File:Stick.skp (This is part of the Backhoe and is designed to be attached between Boom.skp and File:Bucket.skp Screenshot: 800px)
• 02:25, 26 May 2013 Samthetechie talk contribs uploaded File:Boom.jpg (Screenshot of File:Boom.skp)
• 02:23, 26 May 2013 Samthetechie talk contribs uploaded File:Boom.skp (This is part of the Backhoe and is designed to be attached between Articulated_Pivot.skp and File:Stick.skp Screenshot: 800px)
• 23:10, 25 May 2013 Samthetechie talk contribs uploaded File:SHS.jpg (Diagram of SHS (Square Hollow Section))
• 22:42, 25 May 2013 Samthetechie talk contribs uploaded File:3DLifeTracAndBackhoe.skp (This is an example arrangement of mounting the File:Reinforced_Backhoe_With_Articulated_Pivot.skp onto the File:3DLifeTrac.skp. Screenshot: 800px)
• 22:36, 25 May 2013 Samthetechie talk contribs uploaded File:3DLifeTracAndBackhoe.jpg (Screenshot of File:3DLifeTracAndBackhoe.skp)
• 22:28, 25 May 2013 Samthetechie talk contribs uploaded File:Reinforced Backhoe With Articulated Pivot.jpg (A screenshot of File:Reinforced_Backhoe_With_Articulated_Pivot.skp)
• 22:24, 25 May 2013 Samthetechie talk contribs uploaded File:Reinforced Backhoe With Articulated Pivot.skp (A Reinforced version of File:Backhoe_With_Articulated_Pivot.skp)
• 18:31, 25 May 2013 Samthetechie talk contribs uploaded File:Backhoe With Articulated Pivot.jpg (Screenshot of Backhoe_With_Articulated_Pivot.skp)
• 18:16, 25 May 2013 Samthetechie talk contribs uploaded File:Backhoe With Articulated Pivot.skp (Backhoe_With_Articulated_Pivot.skp was created to address point 3. "Add articulated pivot" of Backhoe_Development_Brief. Screenshot here: File:Backhoe_With_Articulated_Pivot.jpg)
• 13:37, 25 May 2013 Samthetechie talk contribs uploaded File:Disable instructor.reg (Fixes the bug when running Sketchup under Wine on Linux where SketchUp crashes on or shortly after startup; either the main window is displayed, or you have already disabled the Welcome screen by forcing off the "Snappy Instructor" dialog.)
• 13:36, 25 May 2013 Samthetechie talk contribs uploaded File:Disable welcome.reg (Fixes the bug when running Sketchup under Wine on Linux where SketchUp crashes on start with no error message by forcing off the "Welcome to SketchUp" dialog )
• 13:35, 25 May 2013 Samthetechie talk contribs uploaded File:Force sketchup hw accel.reg (Fixes the 'SketchUp was unable to initalize OpenGL' bug when running Sketchup under Wine on Linux)
• 00:44, 22 May 2013 Samthetechie talk contribs uploaded a new version of File:Stock Pivot Plate 3 inch hole.jpg (Screenshot of File:Stock_Pivot_Plate_3_inch_hole.skp stock pivot plate with a 3" hole rather than a 4.875" hole which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup )
• 00:44, 22 May 2013 Samthetechie talk contribs uploaded File:Stock Pivot Plate 3 inch hole.jpg (Screenshot of File:Stock_Pivot_Plate_3_inch_hole.skp stock pivot plate with a 3" inch hole rather than a 4.875" hole which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup )
• 00:35, 22 May 2013 Samthetechie talk contribs uploaded File:Stock Pivot Plate 3 inch hole.skp (This is a variant of File:Stock_Pivot_Plate.skp which has a 3 inch pivot hole instead of a 4.875" hole. Therefore the file addresses *feedback from Marcin: "and then to 3" pivot hole." from Samthetechie_log&oldid=93850#Output)
• 17:48, 21 May 2013 Samthetechie talk contribs uploaded File:Backhoe-sketchup.jpg (Screenshot of File:Backhoe.skp)
• 17:44, 21 May 2013 Samthetechie talk contribs uploaded a new version of File:Backhoe.skp (This version includes the following changes: *feedback from Marcin: "needs updating to mickey mouse" which includes this file *replaced the two pieces of 8 foot steel stock with updated component model: [[File:8_foot_stock_4_inch_square_tube_with_half_...)
• 17:27, 21 May 2013 Samthetechie talk contribs uploaded File:11 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 11 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 17:26, 21 May 2013 Samthetechie talk contribs uploaded File:10 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 10 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 17:25, 21 May 2013 Samthetechie talk contribs uploaded File:9 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 9 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 17:25, 21 May 2013 Samthetechie talk contribs uploaded File:8 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 8 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 16:44, 21 May 2013 Samthetechie talk contribs uploaded File:10 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 16:44, 21 May 2013 Samthetechie talk contribs uploaded File:9 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 16:43, 21 May 2013 Samthetechie talk contribs uploaded File:8 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 14:44, 21 May 2013 Samthetechie talk contribs uploaded File:7 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 14:42, 21 May 2013 Samthetechie talk contribs uploaded File:7 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 7 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup )
• 14:39, 21 May 2013 Samthetechie talk contribs uploaded File:3 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 3 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup )
• 14:38, 21 May 2013 Samthetechie talk contribs uploaded File:4 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 4 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup )
• 14:38, 21 May 2013 Samthetechie talk contribs uploaded File:5 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 5 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup )
• 14:37, 21 May 2013 Samthetechie talk contribs uploaded File:6 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 6 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup )
• 14:37, 21 May 2013 Samthetechie talk contribs uploaded File:6 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 14:36, 21 May 2013 Samthetechie talk contribs uploaded File:5 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 14:36, 21 May 2013 Samthetechie talk contribs uploaded File:4 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 14:34, 21 May 2013 Samthetechie talk contribs uploaded File:3 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 14:10, 21 May 2013 Samthetechie talk contribs uploaded File:2 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 14:07, 21 May 2013 Samthetechie talk contribs uploaded File:2 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 2 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup )
• 14:06, 21 May 2013 Samthetechie talk contribs uploaded File:1 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 1 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup )
• 14:04, 21 May 2013 Samthetechie talk contribs uploaded File:1 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 13:19, 21 May 2013 Samthetechie talk contribs uploaded File:11 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 12:23, 21 May 2013 Samthetechie talk contribs uploaded File:12 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 12 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 12:20, 21 May 2013 Samthetechie talk contribs uploaded File:12 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)