Gallery of new files

This special page shows the last uploaded files.

Solar drying system.jpg Rasmus
20:35, 12 March 2016
1,803 × 618; 239 KB
US DOE - Straight Vegetable Oil.pdf Rasmus
18:20, 12 March 2016
; 189 KB
Bio-oil farm.jpg Rasmus
16:57, 12 March 2016
755 × 1,024; 309 KB
3xmetali3standoff2 1mmExtraAlongLinBearing.stl Tobben
10:48, 11 March 2016
; 432 KB
Nai-res-rpt-3-compost-gh-edit-pictures1.pdf Rasmus
23:23, 10 March 2016
; 8.4 MB
Filament Extruders Filabot.jpeg Matyáš Škvor
21:52, 10 March 2016
480 × 395; 46 KB
Filament Extruders Filastruder.jpeg Matyáš Škvor
21:44, 10 March 2016
1,024 × 517; 73 KB
Filament Extruders ConceptDraw.png Matyáš Škvor
21:27, 10 March 2016
679 × 503; 355 KB
Filament Extruders Feed.jpeg Matyáš Škvor
21:22, 10 March 2016
690 × 518; 38 KB
CVRD5biofilter.air.exhaust.jpg Rasmus
19:55, 10 March 2016
706 × 431; 112 KB
AutoWeedImage.png Tom Griffing
04:37, 9 March 2016
494 × 347; 59 KB
AutoWeed.zip Tom Griffing
04:35, 9 March 2016
; 6.81 MB
Filament Extruders Competitor-chart1.jpeg Matyáš Škvor
16:57, 8 March 2016
1,500 × 898; 182 KB
Quick and dirty 12V.JPG Tobben
19:14, 6 March 2016
3,456 × 4,608; 2.92 MB
Zip tie engineering.JPG Tobben
15:46, 6 March 2016
4,608 × 3,456; 3.63 MB
Salvaged diode.JPG Tobben
15:45, 6 March 2016
4,608 × 3,456; 4.04 MB
Drain pipes.jpg Rasmus
14:12, 6 March 2016
640 × 426; 104 KB
Triggered ZJ12A3-4-ZBX with diode.svg Tobben
13:49, 6 March 2016
512 × 512; 7 KB
Unriggered ZJ12A3-4-ZBX with diode.svg Tobben
13:47, 6 March 2016
512 × 512; 7 KB
Unriggered ZJ12A3-4-ZBX 2.eps Tobben
13:36, 6 March 2016
; 71 KB
Unriggered ZJ12A3-4-ZBX.svg Tobben
13:30, 6 March 2016
512 × 512; 6 KB
Triggered ZJ12A3-4-ZBX.svg Tobben
12:55, 6 March 2016
512 × 512; 6 KB
Aluplate on heatbed 2.JPG Tobben
12:37, 6 March 2016
4,608 × 3,456; 3.12 MB
Aluplate on heatbed 1.JPG Tobben
12:37, 6 March 2016
4,608 × 3,456; 3.28 MB
Pronterface port dropdown.JPG Tobben
18:27, 5 March 2016
4,608 × 3,456; 4.89 MB
First Folgerprint.JPG Tobben
18:25, 5 March 2016
4,608 × 3,456; 2.7 MB
Heater element connectors were tinned.JPG Tobben
17:57, 5 March 2016
4,608 × 3,456; 4.61 MB
This step included some unwinding.JPG Tobben
17:55, 5 March 2016
4,608 × 3,456; 4 MB
Y belt not straight.JPG Tobben
17:53, 5 March 2016
4,608 × 3,456; 3.87 MB
Final check and Connecting Power.JPG Tobben
17:42, 5 March 2016
4,608 × 3,456; 3.74 MB
The Folgertech guide has a bug.JPG Tobben
17:40, 5 March 2016
4,608 × 3,456; 3.8 MB
Bed heater wires were tinned.JPG Tobben
17:39, 5 March 2016
4,608 × 3,456; 4.28 MB
This step should have been.JPG Tobben
17:35, 5 March 2016
4,608 × 3,456; 4.12 MB
Wrap them all.JPG Tobben
17:34, 5 March 2016
4,608 × 3,456; 4.07 MB
Ran out of zip.JPG Tobben
17:32, 5 March 2016
4,608 × 3,456; 4.58 MB
Took 2 min longer.JPG Tobben
17:31, 5 March 2016
4,608 × 3,456; 4.63 MB
The orientation of cables.JPG Tobben
17:29, 5 March 2016
4,608 × 3,456; 3.99 MB
CNC Table Assembly.STP Chris DeAngelis
23:17, 4 March 2016
; 9.31 MB
Mounting RAMPS.JPG Tobben
22:21, 4 March 2016
4,608 × 3,456; 4.26 MB
Attaching Acrylic Mount Plate.JPG Tobben
22:20, 4 March 2016
4,608 × 3,456; 4.34 MB
All ends were tinned.JPG Tobben
22:20, 4 March 2016
4,608 × 3,456; 4.35 MB
Maybe easier to do before.JPG Tobben
22:19, 4 March 2016
3,456 × 4,608; 4.21 MB
Rotate Z endstop.JPG Tobben
22:18, 4 March 2016
4,608 × 3,456; 3.87 MB
Microswitch PCB and endstop.JPG Tobben
22:17, 4 March 2016
4,608 × 3,456; 3.81 MB
Most time was spent screwing.JPG Tobben
18:31, 4 March 2016
4,608 × 3,456; 4.12 MB
Hold X axis up close.JPG Tobben
18:30, 4 March 2016
4,608 × 3,456; 3.65 MB
More easily done.JPG Tobben
18:29, 4 March 2016
4,608 × 3,456; 3.68 MB
Tightening X belt.JPG Tobben
18:28, 4 March 2016
4,608 × 3,456; 3.84 MB
Most time was spent shortening.JPG Tobben
18:27, 4 March 2016
4,608 × 3,456; 4 MB
Mount belt tensioner.JPG Tobben
18:26, 4 March 2016
4,608 × 3,456; 4.33 MB

Gallery of new files

Navigation menu

Search