Uploads by Marcin
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 00:13, 6 July 2020 | Topholder.stl (file) |  |
75 KB | 1 | |
| 00:03, 6 July 2020 | Topholder2.png (file) |  |
14 KB | 1 | |
| 00:02, 6 July 2020 | Topholder.png (file) |  |
7 KB | 1 | |
| 21:21, 5 July 2020 | Newmotorpiece.png (file) |  |
29 KB | 1 | |
| 20:46, 5 July 2020 | Refilled.png (file) |  |
11 KB | 1 | |
| 20:38, 5 July 2020 | Truncatedmotor.png (file) |  |
16 KB | 1 | |
| 20:22, 5 July 2020 | Pro2newassy2.png (file) |  |
24 KB | 1 | |
| 20:08, 5 July 2020 | Pro2newassy.png (file) |  |
51 KB | 1 | |
| 20:00, 5 July 2020 | Newzbase.fcstd (file) | |
72 KB | Positionally correct for frame. | 7 |
| 00:28, 5 July 2020 | Cheesier.png (file) |  |
39 KB | 1 | |
| 23:40, 4 July 2020 | Cheesy.png (file) |  |
36 KB | 1 | |
| 23:28, 4 July 2020 | Bottom.png (file) |  |
31 KB | 1 | |
| 23:44, 3 July 2020 | New z mount.png (file) |  |
3 KB | 1 | |
| 19:03, 1 July 2020 | Taxbybracket.png (file) |  |
51 KB | 1 | |
| 18:50, 1 July 2020 | Americanpie.jpg (file) |  |
44 KB | 1 | |
| 20:29, 29 June 2020 | Walmarts.png (file) |  |
12 KB | 1 | |
| 20:28, 29 June 2020 | Walmarts,png.png (file) |  |
12 KB | 1 | |
| 21:33, 26 June 2020 | Firstrotor.fcstd (file) | |
38 KB | Optimized test file with chamfer. | 8 |
| 21:15, 26 June 2020 | Firstrotor2.png (file) |  |
3 KB | 1 | |
| 20:28, 26 June 2020 | Shreddergears.fcstd (file) | |
173 KB | 2 | |
| 20:24, 26 June 2020 | Firstrotor.png (file) |  |
4 KB | 1 | |
| 19:42, 26 June 2020 | Shreddergears.png (file) |  |
14 KB | 1 | |
| 18:21, 26 June 2020 | Shredderrotor.fcstd (file) | |
47 KB | Testing geometry with stock 2.5" and 1.5" tubes | 7 |
| 09:42, 24 June 2020 | Casefile.png (file) |  |
47 KB | 1 | |
| 23:00, 23 June 2020 | Shredderrotor.png (file) |  |
21 KB | 1 | |
| 22:30, 23 June 2020 | Emtsizes.png (file) |  |
62 KB | 1 | |
| 03:13, 23 June 2020 | Stage3pulleyassembly.fcstd (file) | |
890 KB | Added set screws. | 4 |
| 02:46, 23 June 2020 | Stage3pulleyassembly2.png (file) |  |
45 KB | 1 | |
| 02:31, 23 June 2020 | Stage3pulleyassembly.png (file) |  |
73 KB | 1 | |
| 02:15, 23 June 2020 | 3rdstagepulley.fcstd (file) | |
533 KB | 4 | |
| 02:11, 23 June 2020 | Outsideoftube.fcstd (file) | |
10 KB | 1 | |
| 02:09, 23 June 2020 | Outsideoftube.png (file) |  |
4 KB | 1 | |
| 02:06, 23 June 2020 | 3rdstagepulley2.png (file) |  |
35 KB | 1 | |
| 01:59, 23 June 2020 | Blockscadpulleysource.xml.zip (file) | |
524 bytes | 1 | |
| 01:45, 23 June 2020 | 3rdstagepulleypriortosub.png (file) |  |
49 KB | 1 | |
| 01:42, 23 June 2020 | 10pulleygen10pitch.scad.zip (file) | |
918 bytes | Use 80 teeth, and 35 wide to match FreeCAD file. | 1 |
| 01:26, 23 June 2020 | 3rdstagepulley.png (file) |  |
14 KB | 1 | |
| 00:56, 23 June 2020 | Stage1belt.fcstd (file) | |
5 KB | 4 mm thick stage 1 belt | 4 |
| 01:41, 22 June 2020 | Innerstage3-2.png (file) |  |
7 KB | 1 | |
| 01:34, 22 June 2020 | Innerstage3.fcstd (file) | |
37 KB | 60 mm tall insert for 1/2" tubing. | 4 |
| 01:25, 22 June 2020 | Testprint.png (file) |  |
2 KB | 1 | |
| 23:30, 21 June 2020 | Innerstage3.png (file) |  |
3 KB | 1 | |
| 18:49, 19 June 2020 | D3DuniversalHamburg thumb.png (file) |  |
54 KB | 1 | |
| 03:23, 19 June 2020 | Stage3belt.fcstd (file) | |
179 KB | 7.2 mm thick, 32 wide, 90 teeth - used in Stage 4. | 3 |
| 00:26, 19 June 2020 | Stage4belt.png (file) |  |
12 KB | 1 | |
| 00:25, 19 June 2020 | Stage4belt.scad.zip (file) | |
917 bytes | 1 | |
| 00:24, 19 June 2020 | Stage4belt.fcstd (file) | |
182 KB | 1 | |
| 18:05, 18 June 2020 | Template.png (file) |  |
4 KB | 1 | |
| 00:03, 18 June 2020 | Stage3pulley.fcstd (file) | |
858 KB | Chamfered | 8 |
| 23:57, 17 June 2020 | Stage3pulley6.png (file) |  |
40 KB | 1 |
