Seh2_firstfloor.fcstd ‎(file size: 911 KB, MIME type: application/zip)

Warning: This file type may contain malicious code. By executing it, your system may be compromised.

Notes

Note everything here ends up at ~~top plate~~ - 2nd level floor added to allow stairway calculation and positioning - see Stairs
The interior bathroom door and laundry wall are taller than 9' because they reach to the underside of the second story subfloor, or almost 10'. Maybe finish below the joists, and connect to joists?

Landing, stairs, and interior walls were originally designed with z = 0 (top of sill) so were 1.5" above the slab. Moved landing down 1.5" and re-calculated the stairs. For the walls, increased the stud length to 107.625" (3 inches longer than standard pre-cut 9' studs) to add both the extra 1.5" at the bottom and eliminate the need for a double top plate to reach the joists.

File history

Click on a date/time to view the file as it appeared at that time.

Date/Time	Dimensions	User	Comment
16:18, 23 July 2021	(807 KB)	Coderjeff (talk \| contribs)	lower landing 1.5" - merge steps with 7.75" rise to check fit
03:38, 23 July 2021	(837 KB)	Coderjeff (talk \| contribs)	Add placeholder for Module 56 (placeholder is a horizontal 2x4)
02:49, 23 July 2021	(836 KB)	Coderjeff (talk \| contribs)	Add top plate to 57-59
02:43, 23 July 2021	(835 KB)	Coderjeff (talk \| contribs)	interior walls 57-59
00:14, 23 July 2021	(818 KB)	Coderjeff (talk \| contribs)	Add top plates to interior walls
23:21, 22 July 2021	(815 KB)	Coderjeff (talk \| contribs)	Merge 2nd story floor
23:00, 22 July 2021	(762 KB)	Coderjeff (talk \| contribs)	Adjust stairway position
16:24, 21 July 2021	(762 KB)	Coderjeff (talk \| contribs)	Merga landing
14:08, 21 July 2021	(749 KB)	Coderjeff (talk \| contribs)	Merge fixed stairway
14:03, 21 July 2021	(752 KB)	Coderjeff (talk \| contribs)	Stairway - fix, remove 1st step

You cannot overwrite this file.

The following 2 pages use this file: