Torch Table Yaxis

From Open Source Ecology
Revision as of 22:06, 29 August 2009 by Lawrence (talk | contribs) (Created page with '=Bill of Materials= Bill of Materials 5172T12$2.50 per Pack {| border="1" !Item !Number !Cost !Further Info !Purpose !Aquired? |- |V-Groove Bearings 3/...')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Bill of Materials

Bill of Materials 5172T12$2.50 per Pack

Item Number Cost Further Info Purpose Aquired?
V-Groove Bearings 3/8 inch 4 $9.95 Each, Total $39.80 VXB V-Groove bearings To provide low friction linear motion and to constrain motion in the y axis no
Hot rolled steel 3"x1/8" plate 3 feet $10.00 for 4' $10.00 Total Metalsdepot To provide material for stepper motor mount plates, stepper swing arms, and cross beam support no
Hot rolled steel 1"x1" square tubes 16 gauge 6 feet Metalsdepot To provide structural support no
200011 (1/2” sq. x 72” 20 DP 20 Deg) rack 6' length so 1racks $24.80 each Standard Steel Specialty rack for gear to ride on yes
3 x 1/8 inch cold rolled Plate 12 feet Metalsdepot To provide material to make rails no
threaded 3/8 inch rod 5 feet McMaster For attaching V-Groove Bearings, Ball Bearings, and connecting the top/bottom carage no
3/8 inch nuts 50 Part Number: 90473A031 For locking threaded rod in place no
3/8 inch washers 40 Part Number: 90126A031 For locking nuts and for spacers no
3/8" Bore 2 $15.37 Each Total $46.11 McMaster 5172T12, 1327K113, Part Number: 5912K12, 6412K11 Attaches to stepper motors and interfaces with gear rack no
Thrust Bearing 8 McMaster Nylon Part Number: 2797T1 allows the motor to swing freely no
sleeve bearing 1 $1.34 each McMaster Part Number: 6391K143 to connect between the stepper motor and the gear, will also add a bit of adjustable length no
10 gauge bolts 30 $7.78 per Pack of 50 McMaster Part Number: 92610A245 stepper no
10 gauge nuts 8 $1.54 per Pack of 100 McMaster Part Number: 90480A011 stepper no
Washers 16 $2.50 per Pack McMaster Part Number: 95601A330 Holding bearings no
Grease 1 cheap McMaster For greasing rails no
stepper saftey spring 1 $10.00 per Pack of 6 McMaster Part Number: 3114T79 no
Skateboard Bearing:Sealed:ABEC-7 4 $9.95 VXB no