Torch Table Yaxis

From Open Source Ecology
Jump to navigation Jump to search

Main > Digital Fabrication > RepLab Tools > Torch Table


Bill of Materials

{{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: | {{#if: |
{{{title}}} }}
{{{hdrs}}}
{{{row1}}}
{{{row2}}}
{{{row3}}}
{{{row4}}}
{{{row5}}}
{{{row6}}}
{{{row7}}}
{{{row8}}}
{{{row9}}}
{{{row10}}}
{{{row11}}}
{{{row12}}}
{{{row13}}}
{{{row14}}}
{{{row15}}}
{{{row16}}}
{{{row17}}}
{{{row18}}}
{{{row19}}}
{{{row20}}}
{{{row21}}}
{{{row22}}}
{{{row23}}}
{{{row24}}}
{{{row25}}}
{{{row26}}}
{{{row27}}}
{{{row28}}}
{{{row29}}}
{{{row30}}}
{{{row31}}}
{{{row32}}}
{{{row33}}}
{{{row34}}}
{{{row35}}}
{{{row36}}}
{{{row37}}}
{{{row38}}}
{{{row39}}}
{{{row40}}}
{{{row41}}}
{{{row42}}}
{{{row43}}}
{{{row44}}}
{{{row45}}}
{{{row46}}}
{{{row47}}}
{{{row48}}}
{{{row49}}}
{{{row50}}}
{{{row51}}}
{{{row52}}}
{{{row53}}}
{{{row54}}}
{{{row55}}}
{{{row56}}}
{{{row57}}}
{{{row58}}}
{{{row59}}}
{{{row60}}}
{{{row61}}}
{{{row62}}}
{{{row63}}}
{{{row64}}}
{{{row65}}}
{{{row66}}}
{{{row67}}}
{{{row68}}}
{{{row69}}}
{{{row70}}}
{{{row71}}}
{{{row72}}}
{{{row73}}}
{{{row74}}}
{{{row75}}}
{{{row76}}}
{{{row77}}}
{{{row78}}}
{{{row79}}}
{{{row80}}}
{{{row81}}}
{{{row82}}}
{{{row83}}}
{{{row84}}}
{{{row85}}}
{{{row86}}}
{{{row87}}}
{{{row88}}}
{{{row89}}}
{{{row90}}}
{{{row91}}}
{{{row92}}}
{{{row93}}}
{{{row94}}}
{{{row95}}}
{{{row96}}}
{{{row97}}}
{{{row98}}}
{{{row99}}}
{{{row100}}}

}}

{{#if:||}}

| align="center" style="background:#f0f0f0;"|Item | align="center" style="background:#f0f0f0;"|Discription | align="center" style="background:#f0f0f0;"|Amount | align="center" style="background:#f0f0f0;"|Cost per item | align="center" style="background:#f0f0f0;"|Further Info | align="center" style="background:#f0f0f0;"|Purpose | align="center" style="background:#f0f0f0;"|Aquired? |---- |Bearing R6-2RS 3/8"x7/8"x9/32" Sealed |10 pack |4 |$14.95 |VXB Part Number: Kit711 |For preventing the carrage from jumping the track |no |---- |V-Groove Bearings 3/8 inch |single pack |4 |9.95 |VXB V-Groove bearings Part number: Kit8407 |To provide low friction linear motion |no |---- |3/8 inch Hard Fiber Washers |Pack of 100 |16 |2.5 |McMaster Part Number: 95601A330 |Holding bearings |no |---- |Hot rolled steel 3"x1/8" plate |10.0 Ft. |1.40 ft |12.7 |Metalsdepot |To provide material for motor mounts |no |---- |Hot rolled steel 1"x1" square tubes 16 gauge |24ft for $23.28 |5.50 ft |23.28 |Metalsdepot |To provide structural support |no |---- |Gear Rack (1/2” sq. x 72” 20 DP 20 Deg) |6 feet per rack |5.50 ft |24.8 |Standard Steel Specialty Part Number: 200011 |rack for gear to ride on |no |---- |3 x 1/8 inch cold rolled Plate |6.0 Ft. |11.00 ft |17.28 |Metalsdepot |To provide material to make rails |no |---- |3/8 inch threaded rod, Overall Length 36" | Each |4.77 ft |$2 |McMaster Part Number: 98837A031 |for connecting the top and bottom carage |no |---- |3/8 inch nuts |Pack of 100 |48 |4.2 |Part Number: 90473A031 |For locking threaded rod in place |no |---- |3/8 inch washers |Pack of 140 |48 |3.23 |Part Number: 90126A031 |For locking nuts and for spacers |no |---- |Steel 20 Deg Pressure Angle Spur Gear 20 Pitch, 20 Teeth, 1" Pitch Dia, 1/2" Bore |Each |1 |15.37 |McMaster Part Number: 5172T12 |Attaches to stepper motors and interfaces with gear rack |no |---- |sleeve bearing |Each |1 |1.34 |McMaster Part Number: 6391K143 |to connect between the stepper motor and the gear, will also add a bit of adjustable length |no |---- |10-32 set screw 7/16" |per Pack of 100 |1 |5.44 |Part Number: 92311A428 |Set screw for attaching spur gear, sleeve bearing to stepper shaft |no |---- |Zinc-Pltd Stl Pan Head Phillips Machine Screw 10-32 Thread, 1-3/4" Length | Pack of 100 |2 |8.45 |McMaster Part Number: 90272A837 |Connects the mount plate arms to the carrage |no |---- |Zinc-Pltd Stl Pan Head Phillips Machine Screw 10-32 Thread, 2-1/2" Length |Pack of 100 |16 |6.58 |McMaster Part Number: 90272A840 |For connecting the rail, rack, spacer and c channel |no |---- |Zinc-Pltd Stl Pan Head Phillips Machine Screw 10-32 Thread, 3/4" Length |Pack of 100 |6 |5.11 |McMaster Part Number: 90272A831 |Connects the mount plate arms to the carrage |no |---- |Zinc-Plated Steel Machine Screw Hex Nut 10-32 Thread Size, 3/8" Width, 1/8" Height |Packs of 100 |24 |1.55 |McMaster Part Number: 90480A195 |For locking the mount plate swing tightness, tightening the rack and locking the stepper motor in place |no |---- |Nylon 6/6 General Purpose Flat Washer Off-White, No. 10 Screw Sz, .44" OD,.02"-.04" Thk |per Pack of 100 |8 |3.83 |Part Number: 90295A120 |allows the motor to swing freely |no |---- |stepper spring |pack of 6 |1 |10 |McMaster Part Number: 3114T79 |Prevents stepper motor shaft from crunching |no |---- |}