Time for Laser Cutting Scale Models

From Open Source Ecology
Revision as of 16:16, 1 October 2013 by Marcin (talk | contribs) (Created page with "Here's the data: I got 51 tubes and 175 plates out 19 (11 x 8.5) sheets (the 20th was for laser settings tests). The laser was in great shape, so it only took me 15 min to ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Here's the data:

I got 51 tubes and 175 plates out 19 (11 x 8.5) sheets (the 20th was for laser settings tests).

The laser was in great shape, so it only took me 15 min to resize the files, find the right settings for this material, and tile the designs.

Each sheet took 6 minutes to cut. Only towards the end did I notice that the plates had duplicate lines, so this added extra time to each cut.

Time in between cuts was around 3 minutes to remove the previous sheet, load up new material, align, and place weights.

The laser cutting price at NYCR is 25c per minute (for members), so it cost a total of $30 [(20 x 6) x .25] + the cost of the stock material.

Settings for cutting this material on a 35W Epilog are 100% speed, 60% power.