Brick Pressing Rate Calculations
Jump to navigation
Jump to search
Introduction
Under the assumption of incompressible flow and fixed hydrauilic cylinder volume, the brick pressing rate of The Liberator can be calculated for a given hydraulic flow rate.
The Liberator
The Liberator uses a 5x8x2 inch cylinder (diameter x length x rod diameter) for pressing, and a 2.5x14x1.125" cylinder for the soil loading drawer.
The effective volumes for both cylinders differ. This is because the cylinder rod takes up some volume - thereby reducing effective volume and force for the contraction part of the stroke. The expansion part of the stroke uses the full cylinder volume.
Main Cylinder Volume, D= 5 inches, D_rod=2 inches
- Cylinder volume (expansion volume) = 157 cu in
- Rod volume = 25 cu in
- Cylinder volume-rod volume (contraction volume) = 132 cu in
- Volume filled for a complete cycle of the cylinder (expansion volume + contraction volume) = 289 cu in
Secondary Cylinder Volume, d=2.5 inches, d_rod=1.125 inches
- Cylinder volume (expansion volume)
- Rod volume
- Cylinder volume-rod volume (contraction volume)
- Volume filled for a complete cycle of the cylinder (expansion volume + contraction volume)