Backhoe Boom Test Driven Design

From Open Source Ecology
Revision as of 22:59, 21 October 2013 by Marcin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Based on Backhoe Boom Range of Motion Analysis, the procedure is:

  1. Mount a 2x4 hole standard bonding plate with 4 holes showing at top of boom.
  2. Bolt plate using 2 holes only so mount point is 10" above tubing
  3. Weld assist for proper hold

Done. Now to stick. See File:BoomROM.dxf for Test-Driven Design that was used.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Backhoe_Boom_Test_Driven_Design&oldid=109819"