Talk:Digital lost wax for metal casting

From Open Source Ecology
Revision as of 19:59, 19 January 2014 by Morgan Knicely (talk | contribs) (Created page with "To reclaim polystyrene foam for reforming as filament it must first be ground into small particles. Design Objectives - Inexpensive, commonly available and mechanically simpl...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

To reclaim polystyrene foam for reforming as filament it must first be ground into small particles.

Design Objectives - Inexpensive, commonly available and mechanically simple components. - Able to use a variety of power sources

Currently exploring a keyed 5/8" shaft on pillow bearings with 7/12" circular saw blades stacked on it. A stepped pulley enables speed changes for a variety of materials. The drive motor can be electric, gasoline, diesel... anything that will drive the belt.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Talk:Digital_lost_wax_for_metal_casting&oldid=113705"