Ironworker/Manufacturing Instructions

From Open Source Ecology

Revision as of 20:04, 21 January 2010 by WikiSysop (talk | contribs) (Created page with 'See Ironworkers for introduction. We start the build of the ''open source ironworker'' with a 120 ton hole puncher for poking up to 1.5 inch holes in 1" steel (figure based …')

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

See Ironworkers for introduction.

We start the build of the open source ironworker with a 120 ton hole puncher for poking up to 1.5 inch holes in 1" steel (figure based on Edwards ironworkers) plate.

Initial CAD, not finished:

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Ironworker/Manufacturing_Instructions&oldid=11556"