Window Requirement

Starts at height which joins top of window frame right under bond beam.
No trim required after stucco is applied to metal lath on outside
Indoor connection to wall includes stucco on interior.
Contract-First Design - Define any window module as a 4' width (standard 4'x8' construction material for zero wastage)
Test-Driven Development - Test the sample range of sizes for commonly available windows. Test the interface design for fit into a frame. Fit test Condition: determine standard window size for house sliding storm windows. Then oversize the frame to allow all window sized to fit. Devise insulation pattern to match.
Modularity - wrapper (interface on interface) must be defined in 4x8 standard panel size to fit - so frames are identical, but
Iterative Design -
Flexibility -
Swarming -

Navigation menu