Awning Build

From Open Source Ecology
Revision as of 06:19, 22 September 2014 by Marcin (talk | contribs)
Jump to navigation Jump to search

Instructions

  1. Build [2] panels from 2"x4" studs - 8x8 feet without cutting ends off - using [6] 2x4s
  2. Mount [4] purlins on each panel
  3. Cut 2x8 to size - and make it overhang by 3'to support roof
  4. Mount the clear roofing
  5. Lift up onto stem wall, fasten to stem wall and side of MH2
  6. Put in [2] 4x4 support posts in concrete


CAD

DNE

BOM

See [1]