MicroTrac 2015

From Open Source Ecology
Revision as of 23:19, 29 April 2015 by Jopie282 (talk | contribs)
Jump to navigation Jump to search

Introduction

Prototype 2 of the MicroTrac. See Power Cube Genealogy for Power Cube.

Parts Library

Component Area Part Qty Price Weight
Cage Hydraulic Pump .677 cu in, 10.1 gmp @3600 RPM, 3000 PSI max, 4000 RPM max 1 $185 9 lbs
Cage NT filter or SC filter 1 $17 2 lbs
Cage or type E coupler half 1/4" key 2.5" o'all long 2 $9.86 1 lbs
Control 3 spool valve (about 1900-3400 PSI relief setting) 1 $220 35 lbs
Drive Wheel 1
17.5 HP gas engine 1 60 lbs
Hydraulic Reservoir 1 10 lbs
Battery 1 $23 20 lbs
Frame Metal 2x2x1/8" square tube 29" long 6 $30.95 44 lbs
Frame Metal 2x2" square tube 24" long 4 $17 24 lbs
Frame Metal 2x2" square tube 20" long 8 $28.46 40 lbs
Frame Metal 2x2" square tube 7" long 2 $2.49 4 lbs
Frame Metal 7x25" plate 1/4" thick 1
Optional/Unused L095 coupler half 1" shaft 1/4" key 1-1/16" long 1 $15.28 1 lbs
Optional/Unused L095 hytex coupler insert 1 $18.29 0 lbs
Optional/Unused L095 coupler half 3/4" shaft 3/16" key 1-1/16" long or 5/8" 1 $15.28 1 lbs
Total $582 251 lbs

=Design=

Goals

  • 41" width

Design Proposals

Tracks with rotors

draft File:Ose-microtrac-20150429.skp

  • laying out ideas for idler and motor

Past Design Work

Graham_Microtrac

Tracks

Track Proposal Google Drive Folder