Ceramic Printing WASP Extruder

From Open Source Ecology
Revision as of 05:02, 17 January 2016 by Marcin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Liquid Deposition Modeling - http://www.wasproject.it/w/ldm-liquid-deposit-modelling-wasp-extruder/

The above page shows a good design rationale for the clay extruder, though extruder is shot load, not continuous load for the press part. Here is a PDF archived - File:LDM.pdf

Unfortunately, not OSHWA Compliant.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Ceramic_Printing_WASP_Extruder&oldid=134379"