3D Printed Drill

From Open Source Ecology
Jump to navigation Jump to search

Requirements

Problem statement - drills are throwaway devices. They break and you can't fix them readily because they are not appropriate technology. Here we design the world's first appropriate technology cordless drill.

The goal is to select an appropriate @Depth of Modularity to make any cordless drill motor, battery, speed trigger, gear set, and Chuck interoperable with any other.

This converts any drill to one about 10-100 times cheaper (lifetime extends from 1 to 100 years, and cost drops from 100 to about 25 for the initial purchase, so all things considered, the open source version is about 100x cheaper over the lifetime.

Market Research

  • Market share report - [1]
  • Harbor Freight recalls 1.7M cordless Drill Master drills -[2]
  • The two above imply that there is at least 10M cordless drills sold in the USA every year, assuming the 1M is all that Harbor Freight sold (gross underestimate). That is about a $1B market in the USA alone, or 6B globally.

Lifetime of a Cordless Drill

  • 1-2 years in a contractor scenario, check out the guy who spends $5k/year on drill replacements for 40 cordless drills/saws - [3]

Links

  • Small one - [4]
  • Startasys - [5]
  • Taking a DC motor out of a cordless drill -@[6]
  • Alibaba cordless drill motors - [7]