Parts List

Power Cube II engine

Breather cap

Suction strainer, 14 gpm

Suction strainer, 23 gpm

Hydraulic pump, 14 gpm

Engine - $479 - [1]. Sorry, steam engine is forthcoming.
Breather cap - [2] - $8
- 3/4 NPT coupling - found at big box hardware stores
Suction strainer, 1.5" - [3] - $20
- Use this for single Power Cube
- 1-1/2" NPT coupling for threading suction strainer into frame - found at big box hardware
Suction strainer, 2" - [4] - $23
- Use for dual Power Cubes
- Use 2" coupler from bix box store to thread into Power Cube frame
Hydraulic pump - 10 gpm at 3600 rpm, CW rotation - from Power Cube I - [5]
Hydraulic pump - 14 gpm at 3600 rpm, CW rotation - from Power Cube I - [6]

Power Cube

[1] Coupler half, 5/8" - $10
[1] Coupler half, 1" - $10
[1] Solid spider - $14
~~[1] Breather cap - [7] - $8~~
- [1] 3/4 NPT coupling - found at big box hardware stores
[1] Suction strainer, 2" to 1-1/4" - [8] - $23
- Use for dual Power Cubes
- [1] Use 2" coupler from bix box store to thread into Power Cube frame
[1] Pressure relief for power cube bypass- [9]
[1] 20 GPM return Line Filter - [10]
[1] 3/4" NPT Swivel for return line filter going into frame - [11]
[2] 3/4" NPT hex nip on both sides of filter - [12]
[1] 1"-3/4" NPT reducer bushing for frame receptacle for return filter - [13]
[1] 3/4" quick coupler for return line to filter
[2] 1/2" quick couplers for main power lines

Hoses:

Pressure Bypass:

[1] 1/2" NPT Bypass valve - [16]
[3] 1/2" Quick couplers - 1 complete for tee near pump, one going from return filter to tee, and male tip for return line. This gives one extra female quick coupler left over. This set of 3 QCs does not cover hoses going from and to the PowerCube.
[4] 1/2" NPTF hex nip for one and other side of tee, on both tees - [17]
[2] 1/2" NPTF tee - from outlet of pump to pressure bypass, and from bypass valve into return line filter - [18]