Pelton Wheel
The Pelton wheel is an impulse type water turbine: extracting energy from the impulse of moving water, as opposed to water's weight. The design extracts almost all of the impulse energy, allowing for a very efficient turbine. It was invented by Lester Allan Pelton in the 1870s.
The Pelton wheel is the most widely used water turbine in the world. It is the preferred turbine for hydro-power, when the available water source has relatively high hydraulic head at low flow rates, where the Pelton wheel geometry is most suitable. Pelton wheels are made in all sizes: the largest units can be over 400 megawatts, while the smallest ones are only a few inches across.
Gallery
Pelton wheel hydro-electric turbine. Retired from service and now displayed as public sculpture at an old power station site, Barcelona
Brand new Pelton turbine in St. Anton am Arlberg (Switzerland)
Individual buckets are bolted to the main disc of the wheel (seen in: Nevada City Downtown Historic District)
Pelton wheel water turbine, nozzle and bucket (Rankin Kennedy, Electrical Installations, Vol III, 1903)
Sectional view of a Pelton turbine installation
Small hydro power plant
Product Ecology
Possibility of using a windpump to lift water up to a reservoir that acts as a "battery" of potential energy. Then a Pelton turbine micro hydro power plant can convert that energy to electricity.
Links
- other OSE Wiki pages: Pumped Hydroelectric Storage
- Wikipedia: Pelton Wheel
- Mother Earth News (1972) "Water Power: Building a Pelton Wheel"
- "DoradoVista - Small Hydro Power Project"
- "Pelton and Turgo Turbines"