CNC Chop Saw

From Open Source Ecology
Revision as of 11:51, 26 February 2017 by Marcin (talk | contribs) (Created page with "=Introduction= An automated chop saw has the potential to save 75%-90% of the cutting time required for all the dimensional lumber that is used to build a Seed Eco-Home. The...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Introduction

An automated chop saw has the potential to save 75%-90% of the cutting time required for all the dimensional lumber that is used to build a Seed Eco-Home.

The typical precutting process involves this process acting upon a stack of different lengths of dimensional lumber:

  1. taking a pile of dimensional lumber, measuring + marking lengths, a

Design of CNC Chop Saw

  1. Working table surface height is at a comfortable working height for the operator
  2. Must have a landing area o top of the working table where raw dimensional lumber is deposited in a rough manner
  3. Fine positioning of lumber from the
Retrieved from "https://wiki.opensourceecology.org/index.php?title=CNC_Chop_Saw&oldid=148513"