D3D Performance Log

From Open Source Ecology
Revision as of 02:02, 31 March 2017 by Marcin (talk | contribs) (Created page with "=Thu Mar 30, 2017= *The geometry shown below matches the control code configuration of D3D - with dual Y axis configured by running from the second extruder driver. *Note that...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Thu Mar 30, 2017

  • The geometry shown below matches the control code configuration of D3D - with dual Y axis configured by running from the second extruder driver.
  • Note that Y axis will be reversed if the plugs are reversed. No need to correct direction in code - just turn off machine and switch the y stepper driver plugs.
  • Note that the extruder motor had to be rewired (switch middle 2 wires)

Retrieved from "https://wiki.opensourceecology.org/index.php?title=D3D_Performance_Log&oldid=150021"