RAMPS Fan Extender

From Open Source Ecology
Revision as of 02:04, 14 May 2017 by Marcin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • You can add a controlled fan to cool the print when printing PLA- see [1]
  • Do not use on ABS
  • See clear example of difference between using and not using a fan with PLA - [2]
Retrieved from "https://wiki.opensourceecology.org/index.php?title=RAMPS_Fan_Extender&oldid=152188"