Christian Rupp Log
Mon Jul 3, 2017
Added Lazyload to the iframes for a maximum of performance, added buttons for server management (reboot etc.), merged all data to a zip file with a how to, taking [octopi] as a basis. Package will be tested by me tomorrow. (3h) File:PrinterClusterData.zip
Sun Jul 2, 2017
Wrote a webtemplate for managing multiple instances of octoprint,
additionaly step by step instructions to make the OSE Printer Cluster image out of the octopi (8 h)
Sat Jul 1, 2017
Worked on Scanscript, ready for testing (6h)
Fri Jun 30, 2017
Got a SD card setup with octopi and written a documentation about how to do it right here
The Image itself btw can be found here
The hardware setup is displayed in the presentation already, so there is nothing holding us back from testing the software upon a printer. Additionaly, I've figured out some of the missing pieces and began writing a python script for autorecognition of the 3d printers. (5h)
Thu Jun 29, 2017
Got a step-by step plan about what should be done, learned about the G-Code and found those of interest for me from Marlin. (M115 gives me unique Data about the printer, M20 to M30 are used to read, write to the sd card and start the printing process from there) Found out how to reformat fcstd to stl with command line only (for automatic conversion on upload). (1,5h)
Tue Jun 27, 2017
Researched Methods for cluster management, communication between printer and computer etc. Most Promising: Octoprint
This can be run for several printers
Hardware is defined and set, list and setup in the presentation. Very rough price estimate: 45 $ + 20$/printer(5h)
Sun Jun 25, 2017
Finished FreeCAD test, Video is uploaded to youtube. https://www.youtube.com/watch?v=nkDFKByIPfE (about 7h)