Tractor Construction Set 2017

Part Library

Admissible Parts

Motor

• Motor
• Motor mounting bolts
• Motor Mounting lock washers
• Motor Mounting nuts
• Motor Castille Nut
• Motor Castille Nut Pin
• Hub
• Hub Bolts
• Sprocket
• Motor Mount Plate
• Motor Mount Plate Bolts
• Motor Mount Plate Washers
• Motor Mount Plate Nuts
• Motor Fittings

Idler

• 8" pipe
• 12" pipe
• Flange
• 3" bearing
• 1-7/8" bearing
• 3" shaft
• 1-7/8" shaft
• 3" shaft collar
• 1-7/8" shaft collar

Frame

• Narrow Frame
• Wide Frame

Modules

• Motor with sprocket
• Mot

Development Template

edit

Wed Aug 30, 2017 - Part 4

edit

Wed Aug 16, 2017 - Part 3

edit

Tue Aug 8, 2017

Part 2:

Part 1 - Concept, Unviersal Rotor, Tracks - Wed Aug 2, 2017

edit

Modules

• GPS + Computer Vision - using standard phone gps, the tractor has a GPS unit to which the Feed Me App connects. Computer Vision helps guide the tractor.
• Feed Me App - remote control smart phone app app combining GPS with computer vision to allow direct smart phone control,preprogrammed control, and computer vision assist which prevents the tractor from bumping into things
• Control solenoids - connected to Arduino - these allow for automated motion of the tractor
• Hydraulic control module - the hydraulic valves and circuit for running the tractor
• Solar power cube - a small power cube that can run from a single power cube.
• Power cube - the 16 hp base that is scalable and practical up to 160 hp

• Hydraulic Reservoir module - it is the reservoir to which one can connect any number of power cubes
• Cooler module - hydraulic fluid cooling system to itch can be attached any number of power cubes for cooling
• Gasifier module - a gasifier burner that works with charcoal for providing fuel to the power Cube