Filament Extruder Parts

From Open Source Ecology

Revision as of 22:33, 27 September 2017 by Marcin (talk | contribs) (→‎Spool Disk Quarter Section (need 8 total))

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Introduction

These are Lyman Filament Extruder arts that can be printed on a 6" bed, such as Lulzbot Mini open source 3D printer.

Tension Loop

Spool Disk Quarter Section (need 8 total)

File:Spooldisk quarter.fcstd + File:Spooldisk quarter.stl

Spool Holder, Trimmed on Top

File:Spoolholder trimmed.fcstd + File:Spoolholder trimmed.stl

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Filament_Extruder_Parts&oldid=159659"