Arduino Codes

From Open Source Ecology
Revision as of 05:37, 1 November 2017 by Marcin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


OSE Needs

  • Code to run a hot water heater such as [1], which would turn the heater on and off to produce the required temperature, which can be set from 0-100% of the heating element.
  • Thermostat code to activate a water pump for hydronic stove when heated water is between set points.
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Arduino_Codes&oldid=160962"