Open Source Watercraft Hull Printer

From Open Source Ecology

Revision as of 04:28, 20 November 2017 by Eric (talk | contribs) (Created Page + Added Basic Categories + Info)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Basics

- Is a massively scaled up (most likely garage/warehouse sized) D3D Fiberglass Printer

- It will also require some Cleanroom level dust filtration due to the obscenely long print times

- Also require a heated build chamber...but at room scale

- This may seem daunting, but it will provide custom designed, mass produced hulls for the Open Source Watercraft Construction Set

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Open_Source_Watercraft_Hull_Printer&oldid=161583"