D3D v18.04 Software

Background

There are 6 places where software may be configured when developing new versions of the OSE 3D Printer:

1. Marlin - versions after April 23, 2018 work - File:OSE Marlin.zip
2. Configuration file (.ini) in Cura.
3. Start and end g-codes in Cura - contained in configuration file
4. Machine Settings in Cura - contains bed size, z offset, number of extruders, presence of heated bed. And - E steps per mm of filament.
5. Print parameters in Cura - contained in configuration file

Notes

1. Machine settings currently on OSE Linux v1.0 - heated bed needs to be turned on:

To Get Proper Prints with a New Extruder

1. Verify e-steps for the extruder - and make sure Cura machine settings are consistent.
2. Test extruder - so it's extruding correctly with Cura interface

Software

Marlin

• D3D v18.04 Marlin is updated for a geared extruder - see - File:OSE Marlin.zip

Cura

• D3D Lulzbot Cura from D3D Controller