Cura Machine Settings Notes

From Open Source Ecology
Revision as of 23:29, 14 July 2018 by Marcin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • Note that in Machine Settings, if E steps per mm are set to 0, the print still works. This is apparently because start G Code sets E steps to a value >0.
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cura_Machine_Settings_Notes&oldid=175118"