LifeTrac II mark2

From Open Source Ecology
Revision as of 15:24, 6 February 2011 by William (talk | contribs) (Created page with "'''LifeTrac II mark2''' is 18" shorter than '''LT2 mark1'''. Sketch 1 - In this first sketch the rear of LifeTrac2 has been shortened and moved in 18". This can be done by cutt...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

LifeTrac II mark2 is 18" shorter than LT2 mark1.

Sketch 1 - In this first sketch the rear of LifeTrac2 has been shortened and moved in 18". This can be done by cutting 18" out of the 4 base and 2 overhead 4×4×1/4" square tubes just behind the hydraulic cylinder base mount plate.

Sketch 2 - The middle column has been moved back to behind the front loader over-head shaft so it now sits in between the front and rear loader arm shafts. Also the real loader arm hydraulic cylinders have been changed to these - https://www.surpluscenter.com/item.asp?item=9-7602-14&catname=hydraulic which means adding extra mounting plates to the rear loader arm to attach them.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=LifeTrac_II_mark2&oldid=17661"