Prusa i3 MK2 Extruder 3D Printed Parts

From Open Source Ecology

Revision as of 20:23, 5 October 2018 by Marcin (talk | contribs) (Created page with "3d printable parts extracted to stl for the 8 mm height sensor with lowered sensor holder: *Body modified for larger OSE sensor: File:Extruder_mod_8mm.stl *Extruder Cover...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

3d printable parts extracted to stl for the 8 mm height sensor with lowered sensor holder:

Body modified for larger OSE sensor: File:Extruder mod 8mm.stl
Extruder Cover: File:Prusa i3 mk2 extruder adapted cover.stl
Extruder Idler:File:Prusa i3 mk2 extruder adapted idler.stl
Extruder Fan Nozzle: File:Prusa i3 mk2 extruder adapted fanNozzle.stl
Extruder Bearing Shaft: File:Prusa i3 mk2 extruder adapted bearingShaft.stl
Extruder Interface Plate - File:Prusa i3 mk2 extruder adapted interface.stl

Lay the parts like this for packing fraction and proper overhang considerations:

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Prusa_i3_MK2_Extruder_3D_Printed_Parts&oldid=178947"