OSE Marlin

From Open Source Ecology
Revision as of 19:18, 10 January 2019 by Marcin (talk | contribs)
Jump to navigation Jump to search

Genealogy

Links

For D3D software, see D3D_v18.10#OSE_Marlin

Lulzbot Source

  • OSE D3D 3D printer builds upon Marlin, Lulzbot Cura, and the Lulzbot Mini 2 omnidirectional fan shroud. D3D and Lulzbot have the same extruder in common - we both use the E3D Titan Aero extruder. This means that the extruder configuration is identical for both printers - such as retraction settings, steps per mm, etc.
  • See Lulzbot Mini software here - http://download.lulzbot.com/Mini/2.0.0/software/marlin/