Open Source Tires

From Open Source Ecology

Revision as of 17:03, 2 March 2019 by Marcin (talk | contribs) (Created page with "=Introduction= The purpose of the Open Source Rubber Extruder is to enable printing of vehicle tires from thermoplastics. Car tires weigh 20 lb, and 16" truck tires weigh...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Introduction

The purpose of the Open Source Rubber Extruder is to enable printing of vehicle tires from thermoplastics. Car tires weigh 20 lb, and 16" truck tires weigh about 30 lb. The maximum extrusion rate on open source 3D printers is currently 5 lb per hour (see Moarstruder

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Open_Source_Tires&oldid=187029"