3D Printed Belts

From Open Source Ecology
Revision as of 21:00, 25 March 2019 by Marcin (talk | contribs) (Created page with "*Ninjaflex example - 2 in-lb - [https://www.chiefdelphi.com/t/pic-3d-printed-timing-belt/157992] *Nylon is flexible according to MTU - page 5 - [https://digitalcommons.mtu.ed...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • Ninjaflex example - 2 in-lb - [1]
  • Nylon is flexible according to MTU - page 5 - [2]
  • Taulman Nylon Bridge - $24/lb - [3] - good candidate.
  • Can belts be made of Nylon Bridge?

More

  • Printing pulleys - [4]
  • Pulleys work well in nylon - [5]
Retrieved from "https://wiki.opensourceecology.org/index.php?title=3D_Printed_Belts&oldid=188378"