Insulated Heatbed

From Open Source Ecology

Revision as of 21:37, 17 April 2019 by Marcin (talk | contribs) (→‎BOM)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Requirements

Insulated bed works with OSE Thermite Bed, 12/24V industry standard, and 8" silicone heatpad. Smaller bed may be used, such as 6 or 4 inch, and can work decently because of 2" insulation layer.
Nichrome heater, butt connectors

BOM

Binder clips, 3/4" or 19mm - hold up to 1/3" - [1]
Butt crimp connectors , uninsulated - [2]
Insulate with Kapton tape

Links

Materials sourcing - 120V Heatbed

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Insulated_Heatbed&oldid=189998"