RotoKnitic v19.01
Jump to navigation
Jump to search
Using same parts and materials from OSE CircularKnitic v18.03, but switch mounting plates so that the mountain is stationary.
- requires spinning spool for fabric output
- allows for more multiple mountains and input threads
Design
- Needles will rotate in the needle holder
- https://github.com/OpenSourceEcology/circular_knitic_pick-a-needle
Concept
Goals
Needle Accomidation
- pick-a-needle, optionally raise needles to an inactive postion
- Test laser cut needles, printed latch?
- Test 3D printed needles
Fabric Spool
- Apply constant tension on fabric
- Roll onto spool for easy handling and storage