OSE Marlin

From Open Source Ecology

Revision as of 18:25, 30 April 2019 by Marcin (talk | contribs) (→‎Genealogy)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Genealogy

Marlin - File:Marlin v1902.zip - 0.8 mm nozzle. Change log: endstop_reversing was reversed on X and Y compared to former versions, where we now use default after going to plain endstop, and not the endstop breakout board. Cura profile - 0.8 nozzle with Volcano - File:Cura1902.ini
File:Marlin v1810.zip - 0.4 mm nozzle. Cura profile - File:Marlin v1810.ini

Links

For D3D software, see D3D_v18.10#OSE_Marlin

Lulzbot Source

OSE D3D 3D printer builds upon Marlin, Lulzbot Cura, and the Lulzbot Mini 2 omnidirectional fan shroud. D3D and Lulzbot have the same extruder in common - we both use the E3D Titan Aero extruder. This means that the extruder configuration is identical for both printers - such as retraction settings, steps per mm, etc.
See Lulzbot Mini software here - http://download.lulzbot.com/Mini/2.0.0/software/marlin/

Retrieved from "https://wiki.opensourceecology.org/index.php?title=OSE_Marlin&oldid=190872"