3D Printed Terminal Block

From Open Source Ecology

Revision as of 00:38, 1 October 2019 by Marcin (talk | contribs) (Created page with "=Single= Design rationale - wires are clamped against each other in a narrow slot using a standard bolt")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Single

Design rationale - wires are clamped against each other in a narrow slot using a standard bolt

Retrieved from "https://wiki.opensourceecology.org/index.php?title=3D_Printed_Terminal_Block&oldid=200379"